---

Can K Filter systems handle both wood dust and laundry lint?

While the physics of suction are similar, the filter media differs. K Filter specializes in tailor-made solutions:

• For Woodworking: We utilize high-micron filters to capture fine sawdust that can cause respiratory issues.
• For Laundry: We use moisture-resistant, high-flow mesh and bags designed to handle the humid, heavy air exhausted by commercial dryers.

Why Choose K Filter?

Custom Engineering for Demanding Environments

Unlike “one-size-fits-all” retail vacuums, K Filter manufactures systems specifically for the high-duty cycles of professional environments.

Industrial Woodworking: Portable dust extraction that moves with your workflow, from the table saw to the sanding station

Hotels & Resorts: Keep your guest areas dust-free and your laundry rooms fire-safe.

Commercial Kitchens & Restaurants: Manage airborne particulates from specialized cooking or renovation woodcraft.

---

Laundry Lint Filtration (Septic & Greywater)

These systems are installed on the washing machine’s discharge hose to prevent synthetic fibers and lint from clogging pipes or entering septic drain fields.

1. Why do I need a separate Lint Filtration System if my dryer has one?

Dryers catch airborne lint, but washing machines discharge a massive amount of “wet” lint into your plumbing. If you are on a septic system, these non-biodegradable fibers (especially polyesters) can clog your soil’s absorption ability over time.

2. What is the difference between a mesh filter and a pressurized filter?

Mesh/Sock Filters: Simple, inexpensive nylon or metal mesh sleeves that zip-tie to the end of the hose. They catch large clumps but miss fine fibers.

Pressurized Canister Filters: (e.g., Filtrol 160) These are wall-mounted canisters that the water must pass through. They use much finer bags to catch microplastics and heavy lint.

3. How often do I need to clean it?

For a standard family of four, mesh socks should be checked weekly, while canister filters usually need a bag swap or cleaning every 10–15 loads.

Woodworking Dust Collection

Dust collection is about more than just a clean floor; it’s about lung health. Wood dust is a known carcinogen and a fire hazard.

1. What is the difference between a “Shop Vac” and a “Dust Collector”?

• Shop Vac: High suction (vacuum), low volume of air (CFM). Best for small hand tools like sanders.

• Dust Collector: Low suction, high volume of air. Best for large machines like table saws and planers that move a lot of chips.

2. What is a “Two-Stage” system?

A two-stage system uses a cyclone separator before the air hits the motor and filter.

Stage 1: Heavy chips and sawdust fall into a bin.

Stage 2: Only the finest dust reaches the filter. This prevents the filter from clogging and maintains suction power.

3. What does the “Micron Rating” on a filter mean?

The micron rating tells you how small a particle the filter can trap.

• 5 Microns: Stops visible sawdust (still bad for lungs).

• 1 Micron or HEPA: Essential for health. This traps the “invisible” dust that stays suspended in the air and enters your bloodstream via the lungs.

Comparison

Feature	Laundry Filtration	Wood Dust Collection
Primary Goal	Protect plumbing/septic	Protect lungs/respiratory health
Main Material	Microfibers & hair	Sawdust & wood chips
Primary Risk	Pipe blockages	Respiratory disease & fire
Maintenance	Cleaning wet bags/mesh	Emptying bins & knocking filters

---