Skip to content 
This K filter replacement element provides an exact, direct-fit alternative to the Hydac 0185 R 010 ECON2 Optimicron return filter. Built to match original equipment dimensions and pressure ratings, this 10-micron return element maintains fluid cleanliness, protects pumps and valves, and reduces unplanned downtime in hydraulic and industrial process systems.
Use this table to confirm interchangeability with your current filter element part numbers:
| Manufacturer | Original Part Number | Interchange Status |
|---|---|---|
| Hydac | 0185 R 010 ECON2 / 0185R010MM | Direct Fit Alternative |
| Donaldson | P581464 | Direct Replacement |
| Mann Filter | HD 7001 x (HD7001x) | Equivalent |
| Filtrec | RHR185M10B3 / RHR185M10B3/AB1 | Form, Fit, and Function Match |
| Hifi Filter | SH 74322 | Direct Substitute |
Accurate Sizing and Fit: Drops directly into standard Hydac and compatible return filter housings without modifications.
Contaminant Control: Captures particulate matter before fluid cycles back to the reservoir, preventing abrasive wear on sensitive components.
Extended Service Life: Engineered media pleating maximizes dirt-holding capacity while keeping differential pressure low across typical duty cycles.
Broad Compatibility: Suitable for mineral-based hydraulic oils, synthetic lubricants, and industrial fluids across manufacturing, mobile machinery, and plant infrastructure.
Frequently Asked Questions
No. This is a compatible alternative manufactured by the K filter family. It is built to meet or exceed the functional specifications, fit, and filtration efficiency of the original Hydac 0185 R 010 ECON2 filter.
2. Will using an alternative filter affect system pressure?
When properly matched in micron rating and flow capacity, this element maintains normal operating differential pressure. Always monitor your differential pressure indicator after installation to set a baseline.
3. How often should this return filter element be changed?
Change the element based on your return filter housing’s differential pressure indicator, or follow your facility’s planned maintenance intervals (typically every 500 to 1,000 operating hours, or at least annually).
Optimized by Seraphinite Accelerator