...

What is EN1822 HEPA Filter Testing Standard?

What is the EN 1822 Standard?

The EN 1822 standard is a European testing and classification standard used to verify the performance of high-efficiency air filters, including EPA, HEPA Filter, and ULPA filters. Rather than relying on nominal claims, EN 1822 defines how filters must be tested, how efficiency is measured, and how results are classified under controlled laboratory conditions.

At its core, EN 1822 exists to answer a single critical question: Does this filter actually perform at the efficiency it claims, under worst-case particle conditions?

This distinction matters in air filtration systems used in regulated and high-risk environments, where performance assumptions can lead to compliance failures, contamination risk, or system inefficiency.

Who Developed Governs EN 1822?

EN 1822 is developed under the European standardisation framework and is governed through recognised standards bodies responsible for harmonising technical requirements across Europe. It is designed to provide a consistent, repeatable, and verifiable method for testing filters efficient at capturing fine and ultrafine particles.

Importantly, EN 1822 aligns with international best practice and has partially transitioned into the EN ISO 29463 series, now recognised as an international standard for high-efficiency air filter testing.

This transition reflects the global need for:

  • Comparable test results
  • Unified testing procedures
  • Consistent filter classification across markets

Declared Performance vs Independently Tested Performance

One of the most important contributions of the EN 1822 standard is its clear separation between claims and verification.

Many filters are described as:

  1. “HEPA-type”
  2. “Medical-grade”
  3. “High efficiency”

However, EN 1822 only recognises performance that has been measured through defined testing procedures, using calibrated equipment such as a particle counter, controlled test aerosol, and statistically valid particle counting methods.

In simple terms:

Declared performance is what a manufacturer claims

EN 1822 performance is what has been independently tested and classified

Evolution and Regulatory Context of the EN 1822 Standard

Why EN 1822 Was Created (1998)

The EN 1822 standard was first introduced in 1998 to address inconsistencies in how high-efficiency particulate air filters were being tested and described across Europe. Prior to this, HEPA filters were often rated using fixed particle sizes or outdated methodologies that did not reflect real-world worst-case behaviour.

The goal was to create a scientifically defensible method that would:

  • Identify the weakest performance point of a filter
  • Detect leakage that could bypass filter media
  • Standardise filter classification across applications

Key Updates Leading to EN 1822:2019

Over time, improvements in particle measurement technology and a better understanding of aerosol physics led to updates of the standard. These revisions culminated in EN 1822:2019, which refined testing accuracy and aligned parts of the methodology with global practices.

This version remains the most relevant reference point when discussing EN 1822 compliance today.

Transition to EN ISO 29463: What Changed and Why It Matters

Testing procedures originally defined within EN 1822 Parts 2 to 5 were later transitioned into the EN ISO 29463 series. This shift was not merely administrative—it represented a move towards international harmonisation of HEPA and ULPA filter testing.

For decision-makers, this matters because:

  • Specifications may reference both EN 1822 and ISO 29463
  • Tenders often require clarity on which parts apply
  • Auditors expect current, correctly referenced standards

Using outdated references can result in non-compliant specifications, even if the filter itself performs well.

Why Current Standards Matter in Specifications and Audits

In compliance-driven environments, referencing the correct version of a standard is as important as the filter itself. Auditors, quality teams, and regulatory bodies assess not only performance, but also documentation accuracy.

Failure to reference EN 1822:2019 or its ISO equivalents can

  • Delay approvals
  • Trigger re-testing requirements
  • Undermine procurement decisions

This is a common but avoidable issue in long-term air filtration projects.

Structure of the EN 1822 & ISO 29463 Standards

Understanding the structure of the standard helps clarify where failures are most likely to occur and why multiple test stages are required.

EN 1822-1: Classification, Performance Testing, and Marking

This part defines

  1. Filter class (EPA, HEPA, ULPA)
  2. Minimum efficiency thresholds
  3. Labelling and identification requirements

It ensures filters can be correctly identified, traced, and installed, reducing the risk of specification or installation errors.

EN ISO 29463-2: Aerosol Generation and Measurement

This section governs how the test aerosol is produced and measured. Controlled aerosol generation is essential because inconsistent particle size distributions can distort efficiency results.Accurate particle counting ensures results are repeatable, comparable, and statistically valid.

EN ISO 29463-3: Flat Sheet Filter Media Testing

Here, the raw filter media is tested before it is assembled into a finished filter. While important, this step alone is not sufficient, as excellent media performance does not guarantee a leak-free final filter. This distinction is often misunderstood outside professional circles

EN ISO 29463-4: Leakage Testing (Scan Test)

The scan test is one of the most critical elements of the EN 1822 framework. It identifies localised leaks caused by:

  • Media defects
  • Seal failures
  • Frame integrity issues

In real systems, leakage, not media failure, is the most common cause of underperformance.

EN ISO 29463-5: Filter Element Efficiency Testing

This final step validates the overall performance of the assembled filter. It confirms that the complete unit meets its filter class efficiency under MPPS conditions.

Crucially, EN 1822 requires individual filter testing, not just batch testing.

How EN 1822 Defines Filter Efficiency?

MPPS (Most Penetrating Particle Size)

Unlike older standards that test at a fixed particle size, EN 1822 evaluates filters at their most penetrating particle size (MPPS), the size range where a filter is least efficient.

Typically, MPPS falls between 0.1 and 0.3 microns, depending on media structure and airflow conditions. Testing at MPPS ensures:

  • Worst-case performance is measured
  • Efficiency claims are conservative
  • Overstated marketing claims are avoided

From a commercial perspective, MPPS testing protects buyers by ensuring the filter performs under the most demanding conditions, not just ideal ones

EN 1822 Filter Classifications Explained

Under EN 1822, filters are classified based on their measured efficiency at the MPPS (most penetrating particle size), not on nominal or marketing claims. This classification framework applies to EPA, HEPA, and ULPA filters, ensuring consistency across a wide range of air filtration applications.

1. Group E – EPA Filters (Efficient Particulate Air Filter)

Group E (EPA) filters include E10, E11, and E12 classes. These filters are designed to provide high levels of particulate removal but do not meet HEPA-level performance under EN 1822.

Typical characteristics of Group E filters include:

  1. Use in pre-filtration or intermediate filtration stages
  2. Application in HVAC systems where ultra-high efficiency is not required
  3. Lower pressure drop compared to HEPA and ULPA filters

Efficiency ranges at MPPS:

  • E10: ≥ 85%
  • E11: ≥ 95%
  • E12: ≥ 99.5%

2. Group H – HEPA Filters (High Efficiency Particulate Air)

Group H represents what most professionals refer to as true HEPA filters under the EN 1822 standard. This group includes H13 and H14, both widely used in healthcare and pharmaceutical industry environments and cleanrooms.

Key characteristics of Group H filters:

  1. Tested at MPPS using controlled test aerosol
  2. Subject to scan test and leak test requirements
  3. Individually tested, not batch-certified

Efficiency at MPPS:

  • H13: ≥ 99.95%
  • H14: ≥ 99.995%

3. Group U – ULPA Filters (Ultra Low Penetration Air)

ULPA filters (U15, U16, U17) represent the highest efficiency classes under EN 1822 and ISO 29463. These filters are used in ultra-critical applications, particularly in advanced electronics, semiconductor fabrication, and specialised research environments.

Typical features of ULPA filters include:

  1. Extremely high efficiency against ultrafine particles
  2. Significantly higher resistance to airflow
  3. Increased cost and energy impact

While ULPA filters deliver exceptional performance, they are not universally appropriate. Over-specification can lead to unnecessary operational cost, reduced airflow, and system inefficiencies without delivering additional practical benefit.

EN 1822 Classification Table (With Practical Interpretation)


Filter Class (EN 1822)
Filter GroupFilter Class (ISO 29463)Overall Efficiency (%)
E10Group E – EPANot covered≥ 85%
E11Group E – EPAISO 15 E≥ 95%
E12Group E – EPAISO 25 E≥ 99.5%
H13Group H – HEPAISO 35 H≥ 99.95%
H14Group H – HEPAISO 45 H≥ 99.995%
U15Group U – ULPAISO 55 U≥ 99.9995%
U16Group U – ULPAISO 65 U≥ 99.99995%
U17Group U – ULPAISO 75 U≥ 99.999995%

How K FILTER HEPA Filters Are Tested Under EN 1822?

The EN 1822 testing procedure is designed to identify both media efficiency limitations and assembly-related failures. This multi-step approach reflects real-world risks in high-efficiency air filtration.

Step 1 – Flat Sheet Filter Media Testing

In this stage, the raw filter media is tested using a controlled test aerosol and a calibrated particle counter. The goal is to determine the intrinsic filtration capability of the media itself.

While necessary, this step has limitations:

  1. It does not account for manufacturing defects
  2. It does not detect leakage around seals or frames

This is why EN 1822 does not rely on media testing alone.

Step 2 – Leakage Testing (Scan Test)

The scan test is one of the most critical elements of EN 1822. Using a scanning probe and particle counting equipment, the entire filter face and seal area are examined for localised penetration.

This step detects:

  1. Pinholes in the media
  2. Seal failures
  3. Frame integrity issues

In practice, most HEPA filter failures occur due to leakage rather than poor media efficiency, making this step essential for meaningful classification.

Step 3 – Overall Filter Efficiency Testing

The final step measures the overall efficiency of the assembled filter at MPPS. This confirms that the complete filter element meets the required filter class under EN 1822.

Key principles at this stage include:

  • Individual filter testing, not batch averages
  • Verification under worst-case particle size conditions
  • Generation of documented test results for traceability

Typical documentation includes efficiency reports, leakage maps, and classification confirmation, materials often required during audits or quality reviews.

Appropriate Applications for EN 1822

EN 1822 is most relevant where verified high-efficiency air filtration is essential, including:

  • Hospitals and healthcare facilities
  • Pharmaceutical and life-science manufacturing
  • Cleanrooms and controlled environments
  • Electronics and semiconductor industries

In these sectors, EN 1822 supports risk management, regulatory compliance, and operational reliability.

Connect Now! | Contact Us

Scroll to Top
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.