Skip to content 
Protecting Your Marine Engine: High-Performance BOL LFILTER Automatic Type 6.64 Replacement Candles
In the demanding world of marine engineering, the quality of your fuel defines the lifespan of your engine. One of the most persistent threats to vessel reliability is the presence of cat fines. These microscopic, abrasive particles leftover catalysts from the refining process can turn a high-performance engine into a repair liability in a matter of hours.
To combat this, K Filter provides premium replacement filter candles designed specifically for the BOLL FILTER Automatic Type 6.64. Our solutions ensure your fuel system remains a fortress against engine wear.
The Danger of Cat Fines
Cat fines (catalytic fines) are typically composed of aluminum and silicon oxides. Because they are incredibly hard and often jagged, they act like liquid sandpaper within your fuel system.
If your onboard cleaning system is insufficient, these particles bypass primary separators and cause:
- Cylinder Liner Scuffing: Rapid wear of the internal surfaces.
- Piston Ring Failure: Loss of compression and increased oil consumption.
- Component Damage: Precision parts like FIVA valves, fuel pumps, and injection nozzles are highly susceptible to clogging and erosion.
Why Choose the 10 μm Automatic Backflush Solution?
The Boll & Kirch 6.64 system (BOLL FILTER Automatic type 6.64) is a gold standard in the industry. By utilizing a 10 μm (nominal) filtration grade, this automatic backflush filter serves as the “last man standing” before fuel enters the combustion chamber.
Key Benefits of K Filter Replacement Candles:
- Precision Engineering: Our replacement candles are manufactured to meet or exceed the rigorous standards required for BOLL FILTER Automatic type 6.64 housings.
- Optimized Flow Rates: Designed to maintain consistent pressure even during heavy fuel oil (HFO) filtration.
- Durable Mesh Construction: Built to withstand the high-pressure surges of the automatic backflushing cycle without deforming.
- Extended Component Life: By capturing particles down to 10 μm, you significantly reduce the risk of catastrophic failure in your fuel injection equipment.
Comparison: Standard vs. K Filter Replacement
| Feature | Standard Replacement | K Filter Premium Replacement |
| Filtration Grade | 10 μm | 10 μm (High Precision) |
| Material | Stainless Steel Mesh | Reinforced Multi-Layer Mesh |
| Backflush Efficiency | Standard | Enhanced Surface Release |
| Compatibility | BOLL FILTER Automatic type 6.64 | 100% Guaranteed Fit |
Frequently Asked Questions: BOLL FILTER Automatic type 6.64 & Cat Fine Protection
To help you better understand the technical requirements of fuel filtration and the role of K Filter replacements, we’ve compiled the most common questions from marine engineers and procurement officers.
1. Why is 10 μm the industry standard for cat fine protection?
While centrifugal separators remove the bulk of contaminants, they are not 100% efficient against the smallest, most abrasive particles. The 10 μm (micrometer) filtration grade of the BOLL FILTER Automatic type 6.64 acts as a safety barrier. Studies show that particles between 5 μm and 15 μm cause the most significant “sandpaper” wear on cylinder liners and fuel injection pumps.
2. Can I use K Filter candles in my existing Boll & Kirch housing?
Yes. Our replacement candles are engineered to be 100% dimensionally interchangeable with the original BOLL FILTER Automatic Type 6.64. They fit the same candle holders and interact seamlessly with the automatic backflushing arm without requiring any modifications to the filter internals.
3. How often should I replace the filter candles?
While the BOLL FILTER Automatic type 6.64 is a self-cleaning (backflushing) unit, candles are subject to mechanical wear and “permanent fouling” over time. We recommend:
- Visual Inspection: Every 6,000 to 8,000 operating hours.
- Replacement: When the pressure differential (Δp) remains high even after a backflush cycle, or if the mesh shows signs of deformation or “pin-holing.”
4. How do K Filter candles handle “sludge” and heavy fuel oil (HFO)?
Our candles utilize a specialized multi-mantle design. This increases the effective filtration surface area within the same footprint. This design allows for a lower “velocity-over-mesh,” which prevents soft sludge from being forced through the pores and ensures that hard cat fines are trapped on the surface for easy removal during the backflush.
5. What are the signs that my current filters are failing?
If you notice the following, your filter candles may need immediate replacement:
- Frequent Backflushing: The system triggers backflush cycles much more often than usual.
- Fiva Valve Alarms: Irregularities in fuel injection timing often point to fine particles bypassing the filter.
- Increased Aluminum/Silicon in Scrape-down Oil: High concentrations of these elements in laboratory oil analysis indicate that cat fines are reaching the combustion chamber.
6. Are K Filter replacements compliant with marine insurance and engine warranties?
Our filters are manufactured to meet the technical specifications required by major engine builders (such as MAN and WinGD). Using high-quality replacement parts that meet the 10 μm requirement is essential for demonstrating “due diligence” in fuel treatment, which is often a prerequisite for insurance claims involving engine damage.
Maintenance & Reliability
The BOLLFILTER Automatic Type 6.64 is a self-cleaning system, but the efficiency of that cleaning depends entirely on the integrity of the filter candles. Over time, heavy residues and persistent cat fines can lead to “blindness” in the mesh.
K Filter replacement candles ensure that the backflush process remains effective, flushing away contaminants and keeping your engine running at peak performance. Don’t wait for a high-pressure differential alarm to act—ensure your spares are on board and ready for the next bunkering cycle.
Protect your investment. Ensure your combustion chamber remains free of abrasives with K Filter’s high-performance replacement candles for the BOLLFILTER Type 6.64.
1341170 replacement candle filters for Ball
1360012 replacement candle filter
Star pleat replacement 1945523 hydraulic oil filters
1340098 filter element wedge wire skeleton + stainless steel wire woven mesh boll filter
1340009 Candle Filters , 1340009 Boll & Kirch Candle Filters
1340980 Boll & Kirch replacement Candle Filters
1947342 Boll & Kirch replacement Candle Filters
1944785 Boll & Kirch replacement Star palet Filters , 1945821 Boll & Kirch replacement star pleatFilters , 1946447 Boll & Kirch replacement Filters , 1945821 Boll & Kirch replacement Candle Filters , 1947342 Boll & Kirch replacement Candle Filters ,1941355 Boll & Kirch replacement Candle Filters , 1948648 Boll & Kirch replacement Candle Filters , 1340442 Boll & Kirch replacement Candle Filters, 1365425 Boll & Kirch replacement Candle Filters, 1340009 Boll & Kirch replacement Candle Filters, 1341165 Boll & Kirch replacement Candle Filters, 1341170 Boll & Kirch replacement Candle Filters, 1365425 Boll & Kirch replacement Candle Filters, 1948648 Boll & Kirch replacement Candle Filters, 1947342 Boll-and-Kirch-Compatible-Replacements-Filters, 1340079 Boll & Kirch replacement Candle Filters, Boll & Kirch replacement Candle Filters
https://www.facebook.com/kfilters
