PK Series High Flow Filter
PK series high flow filters are designed with multi-layer membrane filter media for large surface area and adapted leak-free technology manufactured in a certified cleanroom for improved filtration in industries like power condensate systems, petrochemicals, wastewater treatment, food & beverage etc. The product is 100& thermally welded capable for wide chemical compatibility and high-dirt holding capacity. PK series high flow filters allow low-pressure drop and are qualified by long service life and superior high-temperature resistance. It can be direct Replace Parker high flow water filter cartridge for destination pretreatment
FEATURES
-
- Outside To Inside Structure Flow Rate
-
- High Surface Area
-
- High Flow Rate
-
- High Dirt Holding Capacity
-
- Multi-Layer Membrane Filter Media
-
- High Efficiency
-
- 100% Thermally Welded
-
- Leakage Free Technology
-
- Superior High Temperature Resistance
-
- Wide Chemical Compatibility
-
- Manufactured In Certified Clean Room
APPLICATIONS
-
- Power Condensate Systems
-
- Petrochemicals
-
- RO Pre – Filtration, Seawater Desalination Pretreatment
-
- Food And Beverage (Filtration Of Bottled Water, Liquid Glucose, Edible Oil, Juice, Soft Drink And Milk.)
-
- Municipal Water
-
- Chemical (Process Waters)
-
- Waste Water Treatment
CONSTRUCTION
| Pleat | Vertical/radial Pleat |
| Outer | Rigid Cage/ Netting |
| Max Operating Temperature | Polypropylene 180℉ (82 ℃), Glass Fiber 248℉ (121 ℃) |
| End Cap | Food grade Polypropylene |
| O ring | EDPM/Viton |
| Filter Media | Pure multi-layer Polypropylene (food grade) Glass fiber/Polyester |
| Recommended change-out pressure | 35psi (2.4bar) @ 68 ℉ (20 ℃) |
| Differential Pressure | 49psi (3.4bar) @ 68 ℉ (20 ℃) |
| Maximum Flow Rate | 80m3/h(40”) , 115m3/h (60”) |
| Length | 40inch(1016mm)/60inch(1525mm) |
| Outer Dimension | 6” (152mm) |
| Precision | 1μm,5μm,10μm,20μm,40μm,70μm,100μm |